Ready-to-use high coverage enamel, easy to apply, suitable for all types of backgrounds, indoors and outdoors. Glossy and opaque.

Perfect for any type of surface, whether wood or metal, outside as well as inside.
Designed specifically to perform ideally on vertical surfaces.
No dripping.

Ready-to-use high coverage enamel, easy to apply, suitable for all types of backgrounds, indoors and outdoors. Glossy and opaque.

Creates a decorative film, water repellent and resistant to atmospheric agents, low yellowing. High density, filling and covering capacity, it is recommended for finishing or maintenance of wood, iron and masonry surfaces.

Hardener for the correct catalysis of Borma Wachs water lacquers, to give the treatment high resistance to trampling and dirt. Use: Indoor. T usage temperature: + 5°C / + 30°C. Catalysis ratio = 10: 1. For professional use only. Keep from freezing.

PART B - Two-component product ideal for bleaching wooden surfaces.

It does not require rinsing and does not alter the wood fibre, it contains caustic soda and hydrogen peroxide.

Corrosive product, for Professional Use only.

For professional use.

0062 / 0063 1Lt + 0,5Lt

Borma Waterbased soap for Window frames is the perfect solution for the frequent cleaning of windows and wooden surfaces in general. Ecological, it gently cleans all types of painted wood, guaranteeing total removal of dust and stains. Thanks to its essential oil content, it gives the treated surface a pleasant cedar scent.

Water-based acrylic sealant, ready to use, transparent.
Super elastic and ready-to-use sealant. Protects the edges of windows and doors from atmospheric agents and moisture absorption. Deep absorption and a high level of water repellency work together to protect windows and doors.

Suitable for all types of wood finishes. Ideal for ordinary cleaning of decking, fencing, furniture and other exterior surfaces, oiled or painted. Effectively removes dirt and grease without damaging the wood. Suitable for daily use. Dilute the product in water.

Recommendations for application:

Apply evenly by brush or roller.

Naturaqua WPC Deck Sealer
• Overcoatable: 2-4 h at 20°C
• Sanding: not necessary
• Approx. yield: 12-16 m2/Lt.
• Final drying time: 6-12 h at 20°C
• Approx. yield: 14-18 m2/Lt.

Treatment based on oils, waxes and natural resins dispersed in water, created for the protection of composite materials, such as WPC, precompressed wood etc.

Quick to dry, it is strongly water- and oil-repellent, allowing to avoid the formation of unpleasant and persistent stains caused by the absorption of oily substances and dirt.

Enriched with UV filters, it penetrates deeply and guarantees a great adhesion and protection of the treated surfaces.

When dry, it permits to create a pleasant natural effect without changing the WPC tone.

Ideal for composite wood

Designed to protect wooden structures before final painting as a surface barrier. A waterbased, odourless and quick-drying Primer formulated to protect newly built, wooden structures while waiting for the subsequent finishes. It provides effective protection against mildew, fungi formation and insect infestation, even in the absence of other treatments. It does not change the colour of the wood and allows the subsequent application of any finish. Recommendations for application:
The product can be used as a pre-treatment before exterior woodstain products, lacquers or finishes in general.BR> Thanks to the high content of active ingredients, it is recommended for waterbased finishing cycles to guarantee greater protection and prolong the duration of the coating. For Exterior use.

Ready-to-use water-based enamel, ecological and odorless, easy to apply, suitable for any type of support, indoors and outdoors.
High density, it is recommended for finishing or maintenance of wood, iron, masonry etc. surfaces.
It does not require a specific primer for wood, but it is possible to consider the use of the Water Undercoat (code NAT6910) or the rustproof Undercoat (code 6915)