Concentrated universal liquid dye. For indoor wooden surfaces. Dilutable in water, acetone, alcohol and nitro thinner for the preparation of base colors. It is also used in small percentages to tone lacquers. Perfectly replaces powdered anilines.

The Mordant Concentrates are liquid dyes in water-solution suitable for spray and brush painting of wood, special for positive effect colors. They allow to obtain strong enhancement of the grain on conifers. They can be diluted with Borma waterbased vehicles for positive stains. They are miscible with each other, have an exceptional transparency and are endowed with remarkable color consistency. They can be over-painted, treated with oil or wax. In combination with the Borma Coloroil System tinting system it is possible to reproduce all the colors of the Borma Wachs color charts.

It is a waterbased vehicle ready to use, with a special aging effect. If applied to tannin-rich woods, such as oak, it easily creates surfaces with an antique appearance. If added with water-based pastes or Waterbased mordant concentrates, they allow to obtain special color effects even on larch. Only for interiors.

Waterbased exterior woodstain. It penetrates into the fibers, providing a first protection. Indoor and outdoor use. Complete the working cycle with the desired finish (e.g. Naturaqua Top Gel).

Universal Stain Concentrate / Interiors and Exteriors A Special water based liquid stain of high strength and light resistance used to colour directly raw wood as well to Tint Basecoats or Topcoats of the NATURAQUA RANGE. Due to its particular formula the stain can be used for Interior as Exterior projects, keeping a good colour brightness till a max suggested dilution ratio 1-1. Ready for use can be diluted with water, alcohol, acetone and other polar solvents, once dry allows to be overcoated with any type of lacquer waterborne, thinner based or PU.

It is a waterbased ready to use vehicle, with a special antique effect.
Ideal for oak, it easily creates supports with an antique appearance with particular shades of grey. It is recommended to carry out preliminary tests to verify the final result.

Ideal for protection and wood colouration
Protective and decorative exterior woodstain for interiors and exteriors with depth wetting properties.
It colours the wood, enhancing the grain.
It contains UV filters and antiseptic additives that provide effective protection against fungi and insects.
Colours are light resistant and have good resistance to atmospheric agents.
Recommendations for application:
Naturaqua Holz Lasur colours are normally brighter, however solvent-based Holz Lasur is characterised by a better penetration and protection capacity. Apply by brush, spray, dipping.

A waterbased acrylic, waxy impregnating self-sealing 3-in-1 finish for interiors and exteriors.
Odourless and dilutable in water it enhances the grain of the wood using natural and bright colours for deep penetration of the wood.
Water repellent and breathable it protects the wood from atmospheric agents. Added UV filters impart light-stability and special additives protect the wood against harmful biological agents. Application of two or three coats is recommended. Recommendations for application:
The colours of Naturaqua Holzwachs Lasur 3IN1 are brighter than the same Holzwachs Lasur 3IN1 oil-wax base.
The level of protection offered by the two products is very similar, however the water-based version needs intermediate sanding between the coats and restoration phase.

Water based treatment, formulated with precious waxes and resins, specific for the protection of all internal surfaces of saunas (benches, panels, floors, ceilings). Transparent, it does not alter the tone of the wood, giving a pleasant natural effect and protecting it from dirt and water. It can be colored, is available in trendy white, gray and black colors.

For cladding, roofing, windows and fences
Naturaqua Dekorwachs Lasur is a high-solid content, satin, water-based finish, suitable both for interiors and exteriors, in a special range of bright or pastel colours. It has excellent coverage power and high resistance against light.
The product, ready for use, demonstrates excellent elasticity and is fast drying. With a high-quality resin base, UV filters and preservatives it protects the wood from biological agents and adverse weather conditions. The product, is easy to apply and is non-drip.
Recommendations for application: For long term durability a minimum of two coats is recommended by brush or spray application. The level of protection offered by DEKORWACHS LASUR and NATURAQUA DEKORWACHS LASUR is very similar, however , when maintenance is required, the waterbased version requires intermediate sanding between the coats.