Designed to protect wooden structures before final painting as a surface barrier. A waterbased, odourless and quick-drying Primer formulated to protect newly built, wooden structures while waiting for the subsequent finishes. It provides effective protection against mildew, fungi formation and insect infestation, even in the absence of other treatments. It does not change the colour of the wood and allows the subsequent application of any finish. Recommendations for application:
The product can be used as a pre-treatment before exterior woodstain products, lacquers or finishes in general.BR> Thanks to the high content of active ingredients, it is recommended for waterbased finishing cycles to guarantee greater protection and prolong the duration of the coating. For Exterior use.

Waterbased exterior woodstain. It penetrates into the fibers, providing a first protection. Indoor and outdoor use. Complete the working cycle with the desired finish (e.g. Naturaqua Top Gel).

Single-component water-based detergent based on organic active ingredients. It allows to effectively clean and prepare the surface before subsequent treatments, removing dirt residues and lightening the color of the wood. Specific for outdoor use, it is recommended to rinse the surface after application. Specially designed for outdoor use.

The product has been formulated to protect new wooden structures, pending subsequent finishing treatments (generally in the winter season). It prevents the graying of wood, effectively protects against the formation of mold and fungus and
from insect infestation in the period in which the wood is left without finishes. It does not alter its natural color. Characterized by an excellent penetration capacity, it allows the application of oils and any other finishing. 
Perfect primer to be used as a pre-treatment before exterior woodstain products, lacquers or oils.
Thanks to the considerable content of active ingredients and the high penetration capacity, the material guarantees superior protection and extends the duration of the coating over time. External use.

Water-based primer for the pretreatment of wooden surfaces. It is ideal as a first basic treatment especially on woods with a high tannin content. Its characteristics allow an excellent adhesion on the wood making it an ideal base to prevent yellowing and the appearance of dark spots on the surface, especially in the case of water-based finishing cycles in light colors

3-in-1 oil-wax based exterior self sealing finish: a single product that impregnates, protects and decorates. It is applied in two or three coats on rough wood. It does not need intermediate sanding. It is maintained with a simple overlay. Suitable for ceilings, beams, external wood cladding, fixtures, fences, pergolas, etc.

Ideal for protection and wood colouration
Protective and decorative exterior woodstain for interiors and exteriors with depth wetting properties.
It colours the wood, enhancing the grain.
It contains UV filters and antiseptic additives that provide effective protection against fungi and insects.
Colours are light resistant and have good resistance to atmospheric agents.
Recommendations for application:
Naturaqua Holz Lasur colours are normally brighter, however solvent-based Holz Lasur is characterised by a better penetration and protection capacity. Apply by brush, spray, dipping.

External wood basecoat, for grainy and brittle wooden surfaces. It masks inhomogeneity and restores a clear and luminous color. Sealing and consolidating, it prepares the surface for finishing, usually withHolzwachs lasur 3in1.

A waterbased acrylic, waxy impregnating self-sealing 3-in-1 finish for interiors and exteriors.
Odourless and dilutable in water it enhances the grain of the wood using natural and bright colours for deep penetration of the wood.
Water repellent and breathable it protects the wood from atmospheric agents. Added UV filters impart light-stability and special additives protect the wood against harmful biological agents. Application of two or three coats is recommended. Recommendations for application:
The colours of Naturaqua Holzwachs Lasur 3IN1 are brighter than the same Holzwachs Lasur 3IN1 oil-wax base.
The level of protection offered by the two products is very similar, however the water-based version needs intermediate sanding between the coats and restoration phase.

Water based detergent to restore wood to its natural color. It removes the gray patina caused by the decomposition of lignin under the action of ultraviolet radiation.
Apply on the wet surface, leave for 5 minutes, then clean the wood with a stiff brush. Rinse with water after application. Ideal for coverings, garden furniture, fences, decking.
Massage the surface with a brush or brush until the surface is still wet. The result is immediate.
If necessary, repeat the operation.