Special product for the maintenance of antiques' furniture. Valuable special oils and extenders are part of this set with a high revitalizing and protective power for wood and its finishes. Penetrating deep, dyes and polishes, covering scratches and abrasions. Thanks to the multiple shades it revives and restores small imperfections in one single step. Yield:
- on rough soft wood 15/20 m² / Lt
- on rough hardwoods 20/30 m² / Lt
- on painted wood 120/140 m² / Lt

Catalyst for two-components oil One coat 2k wood oil in a ratio of 100: 30.

Two-component one-coat oil for the finishing of all wooden surfaces both indoors and outdoors. Mix of natural oils, zero emissions, 100% solid content, to be cured at 30%. Easy to apply (manual or with single-brush), it allows to treat all surfaces both indoors and outdoors with excellent levels of protection. To be used in combination with the relatedcatalizzatore in rapporto 100:30.

Based on waxes and natural oils, the product combines the ease of application of paste wax with the resistance of oil. Colorless, it is used to blend the effects obtained with colored waxes and to give surfaces greater protection, water repellency and hardness. Ideal for the easy restoration of oiled supports that have become brittle over time. Spread with a cloth or brush in thin and uniform layers. Polish with a soft cloth.
Indicative yield: 20-30m2 / Lt.

Based on natural oils and enriched with high quality resins and waxes, Hard Top Oil gives an excellent protection, with a pleasant natural effect. Suitable for kitchen tables and tops in general, as well as cutting boards and wooden utensils, it is certified for food contact according to EN 71.3, DIN53160 and DIN68861. Also available in the waxy version with natural matt effect Hard Top Oil Natural 6020 . Applicable with brush, rag, roller or spray. However, for a particularly natural effect, we recommend removing the excess with a soft cloth. Allow to dry completely before using the treated object. The chopping boards and in general the items of frequent use can be washed with water and neutral soap; they will be subject to maintenance proportional to the frequency of use. Indicative yield: 14-26m2 / Lt

The thermo-treated wood is characterized by a very high density, which often prevents the correct adhesion of conventional finishing products. Thermowood Oil based on raw materials from renewable sources is specifically formulated to penetrate deeply and therefore be well absorbed even by difficult substrates with minimal wettability. Enriched with UV filters and protective wood additives, it creates a wear-resistant protective film, ideal for all thermo-treated outdoor wooden items, including flooring, terraces and bridges. Application in at least two coats is recommended.
1) In case of particularly compact surfaces, for the first coat Thermowood Oil can be diluted from 20% to 30% with Solvoil 06, a slow drying solvent. Proceed with the application of subsequent coats without dilution.
2) To obtain a marked decorative effect, proceed with finishing with a final coat of Decking Oil - Danish Oil.

Regenerates every type of surface, giving additional protection to the original oil finish of the product. The presence of UV filters and special additives protect the wood from harmful agents, direct sunlight and bad weather. Enhances its natural beauty with a natural satin effect.

Oil for Furniture

Based on natural oils and enriched with high quality resins and waxes, it provides a great protection against scratches and surface damages and has a pleasant natural satin effect.
Suitable to protect raw wood or Shabby Provence with a delicate amber tone. Available also in the matt, waxy version. Recommendations for application:
It can be applied by brush, rag, handroller or spray.
For a natural, enriched effect any excess should be removed using a soft cloth. Allow to dry completely before using the treated surface

Oil based product, ready to use, suitable for all wooden surfaces, both indoors and outdoors. It gives water repellency and maintains a pleasantly natural appearance on the surface. Also suitable for immersion. Protects from atmospheric and biological agents and enhances the natural beauty of wood. Colorless or pigmented. It does not undergo exfoliation and does not require sanding. It can be used alone as a periodic surface treatment or as a colored primer before transparent oil finishes(es. Decking Oil HD ).

For cladding, roofing, windows and fences
Dekorwachs Lasur is a satin waxed finish for interiors and exteriors, in a special series of bright or pastel colours.
Thixotropic, it gives excellent coverage and is highly resistant to light.
The product is ready for use, demonstrating excellent elasticity, without any flaking or detatchment over time.
With a base of natural oils, high quality resins, UV filters and preservatives it protects the wood from biological agents and adverse weather conditions.
The product is easy to apply and does not drip even when applied on vertical surfaces.
Recommendations for application:
Application of two coats is recommended.
To renew the coating, simply apply a coat on the dry and clean surface.
No need to sand.