Base oil for restoration and maintenance. Vegetable based, it is also suitable as a complement for shellac polishing.

Special product for the maintenance of antiques' furniture. Valuable special oils and extenders are part of this set with a high revitalizing and protective power for wood and its finishes. Penetrating deep, dyes and polishes, covering scratches and abrasions. Thanks to the multiple shades it revives and restores small imperfections in one single step. Yield:
- on rough soft wood 15/20 m² / Lt
- on rough hardwoods 20/30 m² / Lt
- on painted wood 120/140 m² / Lt

Liquid prepared for the industrial processing of wood. It prevents the adhesion of resins and glues, thus avoiding sticking or soiling with shavings or sawdust. Protects work benches from corrosion. Excellent against humidity and as a lubricant for wood in general.

Special hardener for two-component oil (Parquet Oil 2k and Hardwax Parquet Oil 2K); to be used in a ratio of 100: 10 or 100: 30.

Catalyst for two-components oil One coat 2k wood oil in a ratio of 100: 30.

Recommendations for application:

Apply evenly by brush or roller.

Naturaqua WPC Deck Sealer
• Overcoatable: 2-4 h at 20°C
• Sanding: not necessary
• Approx. yield: 12-16 m2/Lt.
• Final drying time: 6-12 h at 20°C
• Approx. yield: 14-18 m2/Lt.

Treatment based on oils, waxes and natural resins dispersed in water, created for the protection of composite materials, such as WPC, precompressed wood etc.

Quick to dry, it is strongly water- and oil-repellent, allowing to avoid the formation of unpleasant and persistent stains caused by the absorption of oily substances and dirt.

Enriched with UV filters, it penetrates deeply and guarantees a great adhesion and protection of the treated surfaces.

When dry, it permits to create a pleasant natural effect without changing the WPC tone.

Ideal for composite wood

Natural oil, ideal for the preparation of oil-based pigments. It can be used as a primer and finish for natural-effect wood. It penetrates deeply into the porosity of the wood, giving the surface a bright look. It is necessary to periodically carry out maintenance to keep its beauty intact. For internal use only.

Linseed oil, filtered and cooked with traditional systems and with the addition of drying agents, without resins. It is ideal for the preparation of oil pigments. It gives a brilliant finish to both raw and stripped wood. Base oil and natural effect finish. It penetrates deeply into the porosity of the wood. Natural and bright effect. Also recommended as a sealant for terracotta and other surfaces before waxing. The treated surface will be soft and delicate, and will need to be restored periodically to maintain its natural beauty.

Two-component one-coat oil for the finishing of all wooden surfaces both indoors and outdoors. Mix of natural oils, zero emissions, 100% solid content, to be cured at 30%. Easy to apply (manual or with single-brush), it allows to treat all surfaces both indoors and outdoors with excellent levels of protection. To be used in combination with the relatedcatalizzatore in rapporto 100:30.

Based on waxes and natural oils, the product combines the ease of application of paste wax with the resistance of oil. Colorless, it is used to blend the effects obtained with colored waxes and to give surfaces greater protection, water repellency and hardness. Ideal for the easy restoration of oiled supports that have become brittle over time. Spread with a cloth or brush in thin and uniform layers. Polish with a soft cloth.
Indicative yield: 20-30m2 / Lt.