The Borma Universal Paint Remover is ideal for removing old paint from any type of surface, in wood, metal or masonry.

Extra strong gel paint remover based on a special mixture of solvents for use on wooden surfaces. Produced with the latest generation of pure solvents, it is not corrosive but highly effective. Free from methylene chloride, and therefore free from any commercial restrictions, applied on wood does not alter its natural colour. For professional use.

Single-component water-based detergent based on organic active ingredients. It allows to effectively clean and prepare the surface before subsequent treatments, removing dirt residues and lightening the color of the wood. Specific for outdoor use, it is recommended to rinse the surface after application. Specially designed for outdoor use.

Special hardener for two-component oil (Parquet Oil 2k and Hardwax Parquet Oil 2K); to be used in a ratio of 100: 10 or 100: 30.

The product has been formulated to protect new wooden structures, pending subsequent finishing treatments (generally in the winter season). It prevents the graying of wood, effectively protects against the formation of mold and fungus and
from insect infestation in the period in which the wood is left without finishes. It does not alter its natural color. Characterized by an excellent penetration capacity, it allows the application of oils and any other finishing. 
Perfect primer to be used as a pre-treatment before exterior woodstain products, lacquers or oils.
Thanks to the considerable content of active ingredients and the high penetration capacity, the material guarantees superior protection and extends the duration of the coating over time. External use.

PART A

Two-component product ideal for bleaching wooden surfaces.

It does not require rinsing and does not alter the wood fibre, it contains caustic soda and hydrogen peroxide.

Corrosive product, for Professional Use only.

For professional use.

0062 / 0063 1Lt + 0,5Lt

Transparent acrylic lacquer for indoor and outdoor use. It creates an almost invisible film for a rough wood effect. Fields of application: as an insulator to guarantee good adhesion of water-based finishes on oily exotic woods such as teak, iroko and similar; as a surface fixative fornatural effect finishes . Catalyze the product with Borma 4100-2K at 10% to improve its adhesion and surface resistance.

Catalyst for two-components oil One coat 2k wood oil in a ratio of 100: 30.

Water-based primer for the pretreatment of wooden surfaces. It is ideal as a first basic treatment especially on woods with a high tannin content. Its characteristics allow an excellent adhesion on the wood making it an ideal base to prevent yellowing and the appearance of dark spots on the surface, especially in the case of water-based finishing cycles in light colors

3-in-1 oil-wax based exterior self sealing finish: a single product that impregnates, protects and decorates. It is applied in two or three coats on rough wood. It does not need intermediate sanding. It is maintained with a simple overlay. Suitable for ceilings, beams, external wood cladding, fixtures, fences, pergolas, etc.