Based on waxes and natural oils, the product combines the ease of application of paste wax with the resistance of oil. Colorless, it is used to blend the effects obtained with colored waxes and to give surfaces greater protection, water repellency and hardness. Ideal for the easy restoration of oiled supports that have become brittle over time. Spread with a cloth or brush in thin and uniform layers. Polish with a soft cloth.
Indicative yield: 20-30m2 / Lt.

3-in-1 oil-wax based exterior self sealing finish: a single product that impregnates, protects and decorates. It is applied in two or three coats on rough wood. It does not need intermediate sanding. It is maintained with a simple overlay. Suitable for ceilings, beams, external wood cladding, fixtures, fences, pergolas, etc.

Special aerosol touch-up varnish for wood. Fast-drying. Durable and easy to use. Resistant to light it allows a fast and efficient retouch on any external or internal wooden surface.

A waterbased acrylic, waxy impregnating self-sealing 3-in-1 finish for interiors and exteriors.
Odourless and dilutable in water it enhances the grain of the wood using natural and bright colours for deep penetration of the wood.
Water repellent and breathable it protects the wood from atmospheric agents. Added UV filters impart light-stability and special additives protect the wood against harmful biological agents. Application of two or three coats is recommended. Recommendations for application:
The colours of Naturaqua Holzwachs Lasur 3IN1 are brighter than the same Holzwachs Lasur 3IN1 oil-wax base.
The level of protection offered by the two products is very similar, however the water-based version needs intermediate sanding between the coats and restoration phase.

Wax-effect finish for interior and exterior. Enhances the structure of the wood. Water repellent and breathable, it protects the wood from atmospheric agents, also thanks to UV filters. Contains additives to protect wood from harmful biological agents.
Application in two coats is recommended.
For greater resistance of the coating, apply Holz Lasur as a first coat.
Suitable for ceilings, beams, external cladding, wooden houses, pergolas, fences, etc.

Two-component one-coat oil for the finishing of all wooden surfaces both indoors and outdoors. Mix of natural oils, zero emissions, 100% solid content, to be cured at 30%. Easy to apply (manual or with single-brush), it allows to treat all surfaces both indoors and outdoors with excellent levels of protection. To be used in combination with the relatedcatalizzatore in rapporto 100:30.

Ready-to-use consolidant with low viscosity and rapid drying. Gives new strength to the wood that is weakened by moisture or weakened by woodworms. It is normally applied before putty. Suitable for restoring damaged parts of furniture and fixtures.

Special oil for raw wood. Neutral or colored, it is an excellent base in the oil finishing cycles of furniture and floors. Allows to dye easily and evenly over large areas. Colors resistant to light.

Paint based on natural gypsum and acrylic polymer, suitable for wooden surfaces and wall surfaces. Thanks to its high solid content, it achieves excellent filling, making the substrates homogeneous with a reduced number of applications. Of good spreadability and flexibility, it grants, when sanded, the chance of perfectly smooth finishes. It can be overpainted with waterbased and solvent-based paints, waxes, shellac paints. The colors and the particular formula of Shabby Provenzale make it particularly suitable for obtaining finishes in Provencal style and shabby chic.

High quality paint, ready to use, with excellent elasticity and high filling power. Prevents cracking and detachment.
Suitable for both indoor and outdoor use, even on exotic woods.
Enriched with UV filters, it forms a protective film of considerable thickness, resistant to water and weather.
For the preliminary coloring of the surface it is possible to apply the Holz Lasur primer, then proceed with finishing with two coats of Flatting Extra Marine. To implement its durability, Flatting Extra Marine can be directly colored with Oil Pigments.
SPECIAL FOR NAUTICS (INTERNAL / EXTERNAL USE)