Wax polish formulated with pure beeswax and carnauba, enriches and nourishes every wood surface. With its white pigments it protects giving an antique effect - pickled to the treated furniture. Ideal for finishes on oak and ash.

Waterbased exterior woodstain. It penetrates into the fibers, providing a first protection. Indoor and outdoor use. Complete the working cycle with the desired finish (e.g. Naturaqua Top Gel).

Professional product that combines the main waxes of mineral, animal and vegetable origin in its mixture. The protective capacity is supported by light resistant pigments, which enhance the warmth and color of the wood by hiding any imperfections. Borma Holzwachs nourishes, regenerates, protects and polishes every type of wood, particularly suitable for the finishing and maintenance of fine furniture and parquet. With pure beeswax and carnauba wax. Compliant with standard EN 71.III.

Universal Stain Concentrate / Interiors and Exteriors A Special water based liquid stain of high strength and light resistance used to colour directly raw wood as well to Tint Basecoats or Topcoats of the NATURAQUA RANGE. Due to its particular formula the stain can be used for Interior as Exterior projects, keeping a good colour brightness till a max suggested dilution ratio 1-1. Ready for use can be diluted with water, alcohol, acetone and other polar solvents, once dry allows to be overcoated with any type of lacquer waterborne, thinner based or PU.

Fast drying single-component basecoat with remarkable adhesion and transparency. The product is ideal as a first coat for painting or as a base for a wax treatment. The ready-to-use gel product facilitates application on vertical surfaces, avoids dripping and allows, thanks to its high solid content, excellent results even if diluted.

It is a waterbased ready to use vehicle, with a special antique effect.
Ideal for oak, it easily creates supports with an antique appearance with particular shades of grey. It is recommended to carry out preliminary tests to verify the final result.

Transparent acrylic lacquer for indoor and outdoor use. It creates an almost invisible film for a rough wood effect. Fields of application: as an insulator to guarantee good adhesion of water-based finishes on oily exotic woods such as teak, iroko and similar; as a surface fixative fornatural effect finishes . Catalyze the product with Borma 4100-2K at 10% to improve its adhesion and surface resistance.

Special for the preventive treatment and care of surfaces subject to the aggression of harmful wood agents. It is specifically designed for the protection of rough or lacquered wooden surfaces. Odorless, applied in good quantities, prevents and counteracts the harmful agents of wood without consequences on subsequent treatments and without compromising the underlying paints.

Water-based primer for the pretreatment of wooden surfaces. It is ideal as a first basic treatment especially on woods with a high tannin content. Its characteristics allow an excellent adhesion on the wood making it an ideal base to prevent yellowing and the appearance of dark spots on the surface, especially in the case of water-based finishing cycles in light colors

Ideal for protection and wood colouration
Protective and decorative exterior woodstain for interiors and exteriors with depth wetting properties.
It colours the wood, enhancing the grain.
It contains UV filters and antiseptic additives that provide effective protection against fungi and insects.
Colours are light resistant and have good resistance to atmospheric agents.
Recommendations for application:
Naturaqua Holz Lasur colours are normally brighter, however solvent-based Holz Lasur is characterised by a better penetration and protection capacity. Apply by brush, spray, dipping.