It is a waterbased ready to use vehicle, with a special antique effect.
Ideal for oak, it easily creates supports with an antique appearance with particular shades of grey. It is recommended to carry out preliminary tests to verify the final result.

For cladding, roofing, windows and fences
Naturaqua Dekorwachs Lasur is a high-solid content, satin, water-based finish, suitable both for interiors and exteriors, in a special range of bright or pastel colours. It has excellent coverage power and high resistance against light.
The product, ready for use, demonstrates excellent elasticity and is fast drying. With a high-quality resin base, UV filters and preservatives it protects the wood from biological agents and adverse weather conditions. The product, is easy to apply and is non-drip.
Recommendations for application: For long term durability a minimum of two coats is recommended by brush or spray application. The level of protection offered by DEKORWACHS LASUR and NATURAQUA DEKORWACHS LASUR is very similar, however , when maintenance is required, the waterbased version requires intermediate sanding between the coats.

Ready-to-use base, odorless and environmentaL friendly, easy to apply, recommended for wood, indoors and outdoors.
Of high density, it is recommended for finishing or maintenance cycles of wooden surfaces where an effect of considerable coverage and uniformity is desired, granting correct adhesion of the finish. Fluent and elastic, it is characterized by excellent distension and does not drip.

Naturaqua Decking Oil is a mix of emulsified oils in water reinforced with resins to treat wood intended for outdoor environments. Ready for use.
Over time, it deteriorates but does not flake, is easy to apply and has excellent penetration. Produced with the highest quality raw materials, enriched with special UV filters, it guarantees excellent protection against atmospheric agents. Especially for exterior wood. You are advised not to apply on heated wood, or however in direct sunlight. Ready for use, in time it does not flake off. Easy to use, excellent penetration.
Prepared with high quality raw materials, enriched with UV filters additives, the product guarantees an excellent protection from weathering. Special for exteriors.

It is certified for bio-building, is VOC free and ideal for all polished or recently laid wooden floors, for all types of wood. Specific to treat large areas, it is suggested to apply it with polishing machine. To be used on rough or stained wood indoors, for floors, stairs, beads and furniture in general, it gives an imperceptible protective film that is easy to maintain.
Approx yield: Eco Premium Parquet Oil HS: 16-24m²/Lt

Special water-based finishing, proposing traditional silver colour. Ready to use, it can be applied on all kinds of wood, raw or coated, masonry, gypsum and metal. Ideal for restoring and decorating furniture, frames, stucco, metallic surfaces, plaster, wooden and metallic exterior objects. It grants high resistance and pleasant brilliance.

METHOD OF USAGE

Apply on a smooth and clean surface, free from oils, greases, waxes, silicones and old varnishes, polished and treated with a special primer.

Mix well before and during use; apply by brush, for details, or by spray, for large surfaces.

Natural oil, ideal for the preparation of oil-based pigments. It can be used as a primer and finish for natural-effect wood. It penetrates deeply into the porosity of the wood, giving the surface a bright look. It is necessary to periodically carry out maintenance to keep its beauty intact. For internal use only.

Special solvent-based finishing, proposing traditional silver colour. Ready to use, it can be applied on all kinds of wood, raw or coated, masonry, gypsum and metal. Ideal for restoring and decorating furniture, frames, stucco, metallic surfaces, plaster, wooden and metallic exterior objects. It grants high resistance and pleasant brilliance.

METHOD OF USAGE

Apply on a smooth and clean surface, free from oils, greases, waxes, silicones and old varnishes, polished and treated with a special primer.

Mix well before and during use; apply by brush, for details, or by spray, for large surfaces.

Special two-component epoxy-based formulation with glass effect, characterized by an exceptional transparency, suitable for filling cavities and imperfections in various types of materials and for embedding and casting for decorative purposes. Borma Glass 2K is suitable for bonding various materials, including them or with themselves such as: wood, glass, marble, painted materials, etc. (other materials must be verified beforehand) Borma Glass 2K can be colored and / or used as a binder for mixtures. To be used in combination with the related catalyst in ratio 100:40.

Ready-to-use high coverage enamel, easy to apply, suitable for all types of backgrounds, indoors and outdoors. Glossy and opaque.

Perfect for any type of surface, whether wood or metal, outside as well as inside.
Designed specifically to perform ideally on vertical surfaces.
No dripping.