It is a waterbased vehicle ready to use, with a special aging effect. If applied to tannin-rich woods, such as oak, it easily creates surfaces with an antique appearance. If added with water-based pastes or Waterbased mordant concentrates, they allow to obtain special color effects even on larch. Only for interiors.
It is a waterbased ready to use vehicle, with a special antique effect. Ideal for oak, it easily creates supports with an antique appearance with particular shades of grey. It is recommended to carry out preliminary tests to verify the final result.
It is a waxy emulsion with no solvents, designed for the protection and renewal of worn-out parquet. Its composition of natural waxes supplemented with surfactants give a pleasant wear-resistant brilliance. Ideal for protecting oil-treated and lacquered floors. Apply evenly without overlapping. Wait for it to dry completely. According to the type of finishing that needs to be revitalized, there is a matt (for 20-40 gloss matt oil/lacquer finishings) and deep matt (for zero gloss, natural effect finishings) versions of the product. Indicative yield: 60-70m2 / Lt
Special polishing wax for parquet, based on pure bees wax and carnauba. Ideal for the natural finishes of oil-treated surfaces or for the maintenance of varnished parquet. Silicon-free. It easily nourishes and protects all wood surfaces, giving a pleasant and soft veil with antistatic properties. The reusable beeswax for parquet, pigmented with stable and light-resistant colors, is ideal for the restoration of old parquet floors and for special effects.
It is a one-component polyurethane-based varnish ready for use, special as a primer-finish treatment for any wooden flooring, easy and fast. Fast drying, it is characterized by excellent workability even in industrial applications. To increase the covering of the covering, it is possible, even if not strictly necessary, to apply the Borma Parkettlack 2k primer as a preliminary layer.
Ready-to-use binder resin for the individual preparation of quick drying wood putty. Mixed with wood dust from the sanding process it enables a filler matching the original Colour of the wood to be obtained. Any customised colour shades can be achieved with the addition of a few drops of the Borma Holzfarbe Wood Concentrate dyes. Use water for thinning/dilution.