Ready-to-use high coverage enamel, easy to apply, suitable for all types of backgrounds, indoors and outdoors. Glossy and opaque.

Perfect for any type of surface, whether wood or metal, outside as well as inside.
Designed specifically to perform ideally on vertical surfaces.
No dripping.

Ready-to-use high coverage enamel, easy to apply, suitable for all types of backgrounds, indoors and outdoors. Glossy and opaque.

Creates a decorative film, water repellent and resistant to atmospheric agents, low yellowing. High density, filling and covering capacity, it is recommended for finishing or maintenance of wood, iron and masonry surfaces.

High coverage Undercoat is a ready-to-use product, easy to apply, recommended for wood, indoors and outdoors. It creates a smoothing and filling layer that facilitates the subsequent application of High Coverage Enamel . Ideal for furniture, paneling, attics, beams, fixtures, fences, wooden houses, boats.

The product has been formulated to protect new wooden structures, pending subsequent finishing treatments (generally in the winter season). It prevents the graying of wood, effectively protects against the formation of mold and fungus and
from insect infestation in the period in which the wood is left without finishes. It does not alter its natural color. Characterized by an excellent penetration capacity, it allows the application of oils and any other finishing. 
Perfect primer to be used as a pre-treatment before exterior woodstain products, lacquers or oils.
Thanks to the considerable content of active ingredients and the high penetration capacity, the material guarantees superior protection and extends the duration of the coating over time. External use.

Water-based primer for the pretreatment of wooden surfaces. It is ideal as a first basic treatment especially on woods with a high tannin content. Its characteristics allow an excellent adhesion on the wood making it an ideal base to prevent yellowing and the appearance of dark spots on the surface, especially in the case of water-based finishing cycles in light colors

3-in-1 oil-wax based exterior self sealing finish: a single product that impregnates, protects and decorates. It is applied in two or three coats on rough wood. It does not need intermediate sanding. It is maintained with a simple overlay. Suitable for ceilings, beams, external wood cladding, fixtures, fences, pergolas, etc.

External wood basecoat, for grainy and brittle wooden surfaces. It masks inhomogeneity and restores a clear and luminous color. Sealing and consolidating, it prepares the surface for finishing, usually withHolzwachs lasur 3in1.

A waterbased acrylic, waxy impregnating self-sealing 3-in-1 finish for interiors and exteriors.
Odourless and dilutable in water it enhances the grain of the wood using natural and bright colours for deep penetration of the wood.
Water repellent and breathable it protects the wood from atmospheric agents. Added UV filters impart light-stability and special additives protect the wood against harmful biological agents. Application of two or three coats is recommended. Recommendations for application:
The colours of Naturaqua Holzwachs Lasur 3IN1 are brighter than the same Holzwachs Lasur 3IN1 oil-wax base.
The level of protection offered by the two products is very similar, however the water-based version needs intermediate sanding between the coats and restoration phase.

Ready-to-use base, odorless and environmentaL friendly, easy to apply, recommended for wood, indoors and outdoors.
Of high density, it is recommended for finishing or maintenance cycles of wooden surfaces where an effect of considerable coverage and uniformity is desired, granting correct adhesion of the finish. Fluent and elastic, it is characterized by excellent distension and does not drip.

Colorless, non-peeling waterbased finish for wood, based on high-flexibility resins for the protection and decoration of wood. Suitable for wooden houses, windows, pergolas, ceilings, paneling, ... Yield: 8 - 12 m2 / Lt Operating temperature: + 5° C / + 30° C Use: Indoor / Outdoor With UV filters. The precious substances that compose it combined with UV filters, prevent the formation of chromofore molds and prevent the attack of lignivorous insects, guaranteeing an excellent resistance to atmospheric agents. Its natural density facilitates brush application. It does not contain Lindane and PCP