Wax polish formulated with pure beeswax and carnauba, enriches and nourishes every wood surface. With its white pigments it protects giving an antique effect - pickled to the treated furniture. Ideal for finishes on oak and ash.

Professional product that combines the main waxes of mineral, animal and vegetable origin in its mixture. The protective capacity is supported by light resistant pigments, which enhance the warmth and color of the wood by hiding any imperfections. Borma Holzwachs nourishes, regenerates, protects and polishes every type of wood, particularly suitable for the finishing and maintenance of fine furniture and parquet. With pure beeswax and carnauba wax. Compliant with standard EN 71.III.

Fast drying single-component basecoat with remarkable adhesion and transparency. The product is ideal as a first coat for painting or as a base for a wax treatment. The ready-to-use gel product facilitates application on vertical surfaces, avoids dripping and allows, thanks to its high solid content, excellent results even if diluted.

High coverage Undercoat is a ready-to-use product, easy to apply, recommended for wood, indoors and outdoors. It creates a smoothing and filling layer that facilitates the subsequent application of High Coverage Enamel . Ideal for furniture, paneling, attics, beams, fixtures, fences, wooden houses, boats.

Special hardener for two-component oil (Parquet Oil 2k and Hardwax Parquet Oil 2K); to be used in a ratio of 100: 10 or 100: 30.

It is a waterbased ready to use vehicle, with a special antique effect.
Ideal for oak, it easily creates supports with an antique appearance with particular shades of grey. It is recommended to carry out preliminary tests to verify the final result.

Transparent acrylic lacquer for indoor and outdoor use. It creates an almost invisible film for a rough wood effect. Fields of application: as an insulator to guarantee good adhesion of water-based finishes on oily exotic woods such as teak, iroko and similar; as a surface fixative fornatural effect finishes . Catalyze the product with Borma 4100-2K at 10% to improve its adhesion and surface resistance.

It is a waxy emulsion with no solvents, designed for the protection and renewal of worn-out parquet. Its composition of natural waxes supplemented with surfactants give a pleasant wear-resistant brilliance. Ideal for protecting oil-treated and lacquered floors. Apply evenly without overlapping. Wait for it to dry completely. According to the type of finishing that needs to be revitalized, there is a matt (for 20-40 gloss matt oil/lacquer finishings) and deep matt (for zero gloss, natural effect finishings) versions of the product. Indicative yield: 60-70m2 / Lt

Standard
Cod. 0490-90
Cod. 0491-90

Opaco
Cod. 0490-30
Cod. 0491-30

Opaco profondo
Cod. 0490-10
Cod. 0491-10

Water-based primer for the pretreatment of wooden surfaces. It is ideal as a first basic treatment especially on woods with a high tannin content. Its characteristics allow an excellent adhesion on the wood making it an ideal base to prevent yellowing and the appearance of dark spots on the surface, especially in the case of water-based finishing cycles in light colors

Natural oil, ideal for the preparation of oil-based pigments. It can be used as a primer and finish for natural-effect wood. It penetrates deeply into the porosity of the wood, giving the surface a bright look. It is necessary to periodically carry out maintenance to keep its beauty intact. For internal use only.