Universal Stain Concentrate / Interiors and Exteriors A Special water based liquid stain of high strength and light resistance used to colour directly raw wood as well to Tint Basecoats or Topcoats of the NATURAQUA RANGE. Due to its particular formula the stain can be used for Interior as Exterior projects, keeping a good colour brightness till a max suggested dilution ratio 1-1. Ready for use can be diluted with water, alcohol, acetone and other polar solvents, once dry allows to be overcoated with any type of lacquer waterborne, thinner based or PU.

Fast drying single-component basecoat with remarkable adhesion and transparency. The product is ideal as a first coat for painting or as a base for a wax treatment. The ready-to-use gel product facilitates application on vertical surfaces, avoids dripping and allows, thanks to its high solid content, excellent results even if diluted.

Ready to use, Odourless, it is ideal for lightening and uniforming the tone of each type of wood, both indoors and outdoors. Good bleaching power. The intensity of the effects can be managed by simple dilution with water. Application by brush or spray. Keep from freezing.

Extra strong gel paint remover based on a special mixture of solvents for use on wooden surfaces. Produced with the latest generation of pure solvents, it is not corrosive but highly effective. Free from methylene chloride, and therefore free from any commercial restrictions, applied on wood does not alter its natural colour. For professional use.

It is a waterbased ready to use vehicle, with a special antique effect.
Ideal for oak, it easily creates supports with an antique appearance with particular shades of grey. It is recommended to carry out preliminary tests to verify the final result.

Linseed oil, filtered and cooked with traditional systems and with the addition of drying agents, without resins. It is ideal for the preparation of oil pigments. It gives a brilliant finish to both raw and stripped wood. Base oil and natural effect finish. It penetrates deeply into the porosity of the wood. Natural and bright effect. Also recommended as a sealant for terracotta and other surfaces before waxing. The treated surface will be soft and delicate, and will need to be restored periodically to maintain its natural beauty.

Natural oil, ideal for the preparation of oil-based pigments. It can be used as a primer and finish for natural-effect wood. It penetrates deeply into the porosity of the wood, giving the surface a bright look. It is necessary to periodically carry out maintenance to keep its beauty intact. For internal use only.

The ideal product for the total cleaning of all wooden surfaces. With speed and absolute effectiveness it attacks the old layers of wax removing any dirt, dust and ingrained debris without the potential of damage to the underlying lacquers

Based on natural waxes dispersed in water, formaldehyde-free, it nourishes, regenerates and is ideal as polish for Venetian stuccoes. Water soluble, CERT. EN 71 (PAR III), leaves a pleasant surface softness and a pleasant fragrance.

Special thinner for the balanced dilution of oils in Borma Range. Medium drying time.