The thermo-treated wood is characterized by a very high density, which often prevents the correct adhesion of conventional finishing products. Thermowood Oil based on raw materials from renewable sources is specifically formulated to penetrate deeply and therefore be well absorbed even by difficult substrates with minimal wettability. Enriched with UV filters and protective wood additives, it creates a wear-resistant protective film, ideal for all thermo-treated outdoor wooden items, including flooring, terraces and bridges. Application in at least two coats is recommended.
1) In case of particularly compact surfaces, for the first coat Thermowood Oil can be diluted from 20% to 30% with Solvoil 06, a slow drying solvent. Proceed with the application of subsequent coats without dilution.
2) To obtain a marked decorative effect, proceed with finishing with a final coat of Decking Oil - Danish Oil.

.With low environmental impact. Almost odorless, highly transparent, it protects all types of wood.
Characterized by a rapid drying, it gives the wooden surfaces a pleasant decorative effect.
UV filters and special additives make it suitable for outdoor use. R
ecommended as a transparent finish, it can be applied on various colored products to increase the protection coefficient: Holz Lasur, Holzwachs Lasur, Teak Oil and Terrace OIl.

Self sealing-transparent finish based on vegetable oils, resins and waxes. Characterized by a medium drying time and high viscosity, it allows effective and lasting protection against trampling and staining. It combines hardness and resistance to a natural effect. Suitable for parquet and all interior surfaces. Available in different gloss levels, it enhances the natural beauty of wood.
Recommended application in two or three coats, with a roller, brush, spray or rag, on rough wood or in any case free of old paint residues. A background coloring can be obtained with Grundieroel Coloroil.

Cleaning with neutral detergents such as Parkettreiniger, maintenance with wax, also as kit: Kit 1 o Kit 2.

Transparent base-finish product based on vegetable oils, resins and waxes. Characterized by a rapid drying, it allows to obtain an effective and lasting protection from trampling and stains. It combines hardness and resistance to a natural effect. Suitable for parquet and all interior surfaces. Available in different gloss levels, it enhances the natural beauty of wood. Recommended application in two or three coats, with a roller, brush or rag, on rough wood or in any case free of old paint residues. A background coloring can be obtained with Grundieroel Coloroil .

Available also in the waxy matt version: Hardwax Parquet Oil Quick, natural matt effect.

Cleaning with neutral detergents such as Parkettreiniger, maintenance with wax, also as a kit: Kit 1 or Kit 2.

For cladding, roofing, windows and fences
Naturaqua Dekorwachs Lasur is a high-solid content, satin, water-based finish, suitable both for interiors and exteriors, in a special range of bright or pastel colours. It has excellent coverage power and high resistance against light.
The product, ready for use, demonstrates excellent elasticity and is fast drying. With a high-quality resin base, UV filters and preservatives it protects the wood from biological agents and adverse weather conditions. The product, is easy to apply and is non-drip.
Recommendations for application: For long term durability a minimum of two coats is recommended by brush or spray application. The level of protection offered by DEKORWACHS LASUR and NATURAQUA DEKORWACHS LASUR is very similar, however , when maintenance is required, the waterbased version requires intermediate sanding between the coats.

Naturaqua Decking Oil is a mix of emulsified oils in water reinforced with resins to treat wood intended for outdoor environments. Ready for use.
Over time, it deteriorates but does not flake, is easy to apply and has excellent penetration. Produced with the highest quality raw materials, enriched with special UV filters, it guarantees excellent protection against atmospheric agents. Especially for exterior wood. You are advised not to apply on heated wood, or however in direct sunlight. Ready for use, in time it does not flake off. Easy to use, excellent penetration.
Prepared with high quality raw materials, enriched with UV filters additives, the product guarantees an excellent protection from weathering. Special for exteriors.

It is certified for bio-building, is VOC free and ideal for all polished or recently laid wooden floors, for all types of wood. Specific to treat large areas, it is suggested to apply it with polishing machine. To be used on rough or stained wood indoors, for floors, stairs, beads and furniture in general, it gives an imperceptible protective film that is easy to maintain.
Approx yield: Eco Premium Parquet Oil HS: 16-24m²/Lt

Mixture of natural oils, zero emissions, special for the protection of exterior wooden surfaces. Enriched with UV filters and preservatives it guarantees a high protection from atmospheric and biological agents. The addition of the catalyst increases its surface performance making it ideal for finishing terraces and decks in exotic wood.
Odorless, it can be customized in the desired color using oil pigments.
Preferably avoid application on overheated substrates or under direct sun. The application of the product must be carried out as uniformly and continuously as possible, without interruptions. After the catalysis, if necessary the mixture can be diluted with Solvoil Plus. To be used with the related catalizzatore.

Catalysis ratio: 30%

Non-film-forming water-based impregnating agent based on resins and oils.

It penetrates deeply into the wood, enhances the structure, giving it a bright and lively tone.

Low viscosity, deep wetting, non film-forming semi-transparent stain. Recommended for artisanal and industrial cycles.

Iron oxides and UV filters protect wood lignin from decomposition. Special additives protect wood from molds and insects. Suitable for impregnating machines.

One coat is sufficient for interior application.