Suitable for all types of wood finishes. Ideal for ordinary cleaning of decking, fencing, furniture and other exterior surfaces, oiled or painted. Effectively removes dirt and grease without damaging the wood. Suitable for daily use. Dilute the product in water.

Designed to protect wooden structures before final painting as a surface barrier. A waterbased, odourless and quick-drying Primer formulated to protect newly built, wooden structures while waiting for the subsequent finishes. It provides effective protection against mildew, fungi formation and insect infestation, even in the absence of other treatments. It does not change the colour of the wood and allows the subsequent application of any finish. Recommendations for application:
The product can be used as a pre-treatment before exterior woodstain products, lacquers or finishes in general.BR> Thanks to the high content of active ingredients, it is recommended for waterbased finishing cycles to guarantee greater protection and prolong the duration of the coating. For Exterior use.

Single-component water-based detergent based on organic active ingredients. It allows to effectively clean and prepare the surface before subsequent treatments, removing dirt residues and lightening the color of the wood. Specific for outdoor use, it is recommended to rinse the surface after application. Specially designed for outdoor use.

The product has been formulated to protect new wooden structures, pending subsequent finishing treatments (generally in the winter season). It prevents the graying of wood, effectively protects against the formation of mold and fungus and
from insect infestation in the period in which the wood is left without finishes. It does not alter its natural color. Characterized by an excellent penetration capacity, it allows the application of oils and any other finishing. 
Perfect primer to be used as a pre-treatment before exterior woodstain products, lacquers or oils.
Thanks to the considerable content of active ingredients and the high penetration capacity, the material guarantees superior protection and extends the duration of the coating over time. External use.

Recommendations for application:

Apply evenly by brush or roller.

Naturaqua WPC Deck Sealer
• Overcoatable: 2-4 h at 20°C
• Sanding: not necessary
• Approx. yield: 12-16 m2/Lt.
• Final drying time: 6-12 h at 20°C
• Approx. yield: 14-18 m2/Lt.

Treatment based on oils, waxes and natural resins dispersed in water, created for the protection of composite materials, such as WPC, precompressed wood etc.

Quick to dry, it is strongly water- and oil-repellent, allowing to avoid the formation of unpleasant and persistent stains caused by the absorption of oily substances and dirt.

Enriched with UV filters, it penetrates deeply and guarantees a great adhesion and protection of the treated surfaces.

When dry, it permits to create a pleasant natural effect without changing the WPC tone.

Ideal for composite wood

Water based detergent to restore wood to its natural color. It removes the gray patina caused by the decomposition of lignin under the action of ultraviolet radiation.
Apply on the wet surface, leave for 5 minutes, then clean the wood with a stiff brush. Rinse with water after application. Ideal for coverings, garden furniture, fences, decking.
Massage the surface with a brush or brush until the surface is still wet. The result is immediate.
If necessary, repeat the operation.

Two-component one-coat oil for the finishing of all wooden surfaces both indoors and outdoors. Mix of natural oils, zero emissions, 100% solid content, to be cured at 30%. Easy to apply (manual or with single-brush), it allows to treat all surfaces both indoors and outdoors with excellent levels of protection. To be used in combination with the relatedcatalizzatore in rapporto 100:30.

It allows intensive cleaning of the wood, removing stubborn dirt and residues of previous oil-based or impregnating treatments. It is also used to degrease exotic timbers particularly rich in oils and extracts. In this case it is recommended to dilute the product with water 1: 1. Wet the substrate with plenty of water before treatment. Due to the high concentration of active ingredients, Extra Strong Wood Cleaner can alter the natural color of the wood making it darker. To restore the original color of the wood, use Exterior Wood Cleaner later.

It is a decking oil formulated on the basis of reinforced natural oils with a high penetration coefficient. Thanks to its low viscosity it penetrates deep into the wood and thanks to the high solid content it gives an effective and breathable protection without exfoliation and with a natural satin effect. Enriched with UV filters and protective additives against harmful wood agents. The product is characterized by an extreme ease of application, even if colored, and maintenance (it does not require sanding).

The thermo-treated wood is characterized by a very high density, which often prevents the correct adhesion of conventional finishing products. Thermowood Oil based on raw materials from renewable sources is specifically formulated to penetrate deeply and therefore be well absorbed even by difficult substrates with minimal wettability. Enriched with UV filters and protective wood additives, it creates a wear-resistant protective film, ideal for all thermo-treated outdoor wooden items, including flooring, terraces and bridges. Application in at least two coats is recommended.
1) In case of particularly compact surfaces, for the first coat Thermowood Oil can be diluted from 20% to 30% with Solvoil 06, a slow drying solvent. Proceed with the application of subsequent coats without dilution.
2) To obtain a marked decorative effect, proceed with finishing with a final coat of Decking Oil - Danish Oil.